Technical superiority

1.XBS30 is a mortar conveying equipment specially developed for the characteristics of floor heating construction, which is suitable for large-area and efficient construction of fine stone concrete filling layer or mortar filling layer in floor heating engineering.
2.XBS30 is also suitable for the transportation of fine stone concrete, refractory and thermal insulation materials in various engineering construction; The transportation of green soil in the construction of ecological environment and the pressure grouting of various foundation piles.
3.XBS30 fine stone pump is replaced with φ100 conveying pipe on the basis of φ80 conveying pipe, which can convey concrete below 3cm, making XBS fine stone pump more widely used.

Performance characteristics

1. Adopt advanced S-tube valve to change direction, which can meet the transportation of fine stone concrete;
2. The glasses plate and the cutting ring are made of high-hardness and wear-resistant alloy materials, so that the service life is longer;
3. The outlet pressure is high, which can meet the transportation requirements of high-rise buildings and long-distance construction;
4. Hydraulic oil is cooled by air cooling system, which has good cooling effect and is easy to use;
5. It has anti-pump function to minimize pipeline blockage;
6. Equipped with manual centralized lubrication system to ensure the service life of rotating parts;
7. The electrical box is equipped with a limited remote control handle for easy operation.

Product configuration

1. Hydraulic system
The application of brand-new hydraulic control reversing technology makes the pumping work more reliable and the failure rate of hydraulic system lower; Equipped with special valve of hydraulic control system, large flow, low energy consumption and small impact, extending service life.
2. Power system
The motor fine stone pump adopts domestic motors and Siemens Bede motors of well-known brands at home and abroad, and the diesel fine stone pump adopts Tianjin Leiwo and Yuchai brands with low energy consumption and high efficiency.
3. Main oil pump
Adopting joint venture brand constant power variable piston pump, constant power control can effectively prevent motor and diesel engine from overloading, and bear higher pressure and load than conventional gear pump.
4. Cooling system
Adopting air cooling or water cooling double cooling system is not only suitable for high temperature climate, but also suitable for severe cold climate, which effectively controls the oil temperature of hydraulic system and ensures the safety and reliability of equipment operation.
5. Electronic control system
The main electrical appliances adopt Schneider and LS brands.
6. Hopper device
Increase the volume of hopper and equip the fence with vibration motor to meet the requirements of pumping fine stone concrete.
7. S-tube valve
S-tube valve is made of high manganese steel by integral casting, and the easy-to-wear surface is surfacing with wear-resistant materials, which has the advantages of high pressure resistance and wear resistance. The transition of the inner cavity is smooth, the concrete flows smoothly in it, and the pumping performance is further improved; The spline shaft adopts alloy material for special surface treatment, which improves the wear resistance and fatigue strength.
8. Glasses plate and cutting ring
Glasses plate and cutting ring are made of cemented carbide inlay, which is durable.
9, hydraulic pipe joint
The hose is imported from Italy, and the connector is Eaton, USA. The hose connector assembly is provided by Eaton.
10, centralized lubrication system
Lubricant is injected into the main pipeline by a plunger pump and distributed to each lubrication point through a distributor. "Point-to-point" lubrication protects key components from wear.

Technical parameter

Case